Descriptions
The automatic anode jacking frame, known as beam riser fixture, is used to lift the anode busbar periodically. The automatic anode jacking frame is regularly lifted by the PTM to the area above the pot. The frame-equipped devices are handled by remote control for operations such as clamping of anode rods, getting close to the anode busbar, release of grabs, etc. The anode jacking frame is used when the bus bar has reached its lower limit. It clamps the anodes into position while freeing the bus bar, allowing it to be raised.
Structure:
The aluminium smelter equipment consists of the frame, anode grabs, hydraulic station, lifting beams, landing legs, ground supports, etc. All anode grabs springs are installed with the same height and travel distance to ensure the synchronization of all clamps actions.
Zhengzhou Joda is the professional supplier of the automatic anode jacking frames. Our frames has exported to Malaysia, and also made positive opinion to German clients.
Features:
- 65 Experiences
- 1:2 Air Amplifier
- Full Remote Control
- Patented Design
- Significant Energy Saving
- Turn-Key Solutions
